Home > Industry > The correct storage method of bearings

The correct storage method of bearings

wallpapers Industry 2020-10-26
1. Keep the original packaging and do not open it arbitrarily. If the packaging is found to be damaged, it must be opened and cleaned carefully, and the packaging must be re-oiled.
2. The relative humidity of the storage room should not exceed 60%, and the temperature difference should not be too large. The bearings in the original packaging can be stored for several years. Sealed bearings or bearings with dust covers, after long-term storage, the lubrication characteristics of the grease filled in the bearings may be reduced.
3. The storage room should also be protected from vibration and shaking. Bearings that are not stored in the original packaging should be properly stored. It is strictly forbidden to put the bearings together with corrosive things to prevent corrosion and pollution.
4. When storing large rolling bearings, they can only be placed flat, and the sides of the inner and outer rings should all be supported. If stored upright, the inner and outer rings and rolling parts are heavier, and the inner and outer ring walls are relatively thin, which may cause permanent deformation.

What are the factors that cause motor bearing damage

Detection methods and instruments for abnormal bearing noise

How are the bearings insulated?

Say something
  • All comments(0)
    No comment yet. Please say something!
Tag: bearings