Home > Environment > The Working Principle Of Deep Groove Ball Bearings

The Working Principle Of Deep Groove Ball Bearings

wallpapers Environment 2020-12-22

Working principle: Deep groove ball bearings mainly bear radial load, and can also bear radial load and axial load at the same time. When it only bears radial load, the contact angle is zero. When the deep groove ball bearing has a large radial clearance, it has the performance of an angular contact bearing and can bear a large axial load. The friction coefficient of the deep groove ball bearing is very small and the limit speed is also high.

 

The deep groove continuous uninterrupted raceway of SKF deep groove ball bearings. There is a very good degree of closeness between the raceway and the steel ball, which can make the bearing bear bidirectional radial and axial loads. This type of bearing has a wide range of uses, and the design is extremely simple and inseparable. It is suitable for high-speed and ultra-high-speed environments and runs stably. From a maintenance perspective, it basically does not require any maintenance. And deep groove ball bearing is also the most widely used bearing type.

 

Therefore, SKF also provides bearings with a variety of designs, varieties, series and sizes. SKF deep groove ball bearings are suitable for shaft diameters ranging from 3 to 1500 mm. They are supplied in three performance levels: SKF high-quality standard bearings, SKF Explorer bearings with high load capacity, and SKF energy-saving energy-efficient (E2) bearings.

 

ERIC BEARING LIMITED has been supplying bearings for more than 8 years, and we have been a customer-driven distributor of various TOP brand bearings. If you have any questions about bearings, you are welcome to contact us for free, or you can leave a message, we will reply to you as soon as possible.

 



Say something
  • All comments(0)
    No comment yet. Please say something!
Tag: